Thread & Thimbleclear craft guidance
Garment planning

Button Spacing Calculator

Place button centres evenly between two fixed endpoints.

Your measurements

Your resultEnter measurements to begin

Results appear here with the calculation assumptions.

How the estimate works

Two end margins are removed from the available length, then the remainder is divided by one fewer than the number of buttons.

Enter the measurements correctly

The length is measured along the intended button-centre line. The margin is the distance from each end to the first or last centre, not the button edge.

Worked example

Five buttons across 40 units with 2-unit end margins produce four equal centre gaps of 9 units.

Apply the result

Six buttons create five gaps. With 24 units of length and 1-unit margins, spacing is 22 ÷ 5 = 4.4 units. Check placket overlap, button diameter and areas needing closure before marking permanent holes.

Before relying on the number

Reserve top and bottom clearances first and check that buttonholes fit the available fabric.

Read the related guide →